 Friends links |
|
| Picture |
Heading |
Updated |
 |
Silver Power
The silver brazing alloy can be made intopowder, It is suitable for the brazing of narrow gap and complex components. It can save the dosage。 |
2017-10-15 |
 |
Nickel Bronze Brazing Alloy
Nickel bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The strength of joint is hig |
2017-10-12 |
 |
Brass Solder
Brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well |
2017-10-05 |
 |
Sn-Ag Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-09-10 |
 |
Flux-cored Aluminium Brazing Alloy
The Aluminium brazing alloy can be made into flux cored brazing alloy. Flux cored Aluminium brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption. |
2017-09-05 |
 |
Brass Brazing Paste
After the preparation of Brass brazing alloy into powder,make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components. Product is suitable for brazing carbide. |
2017-08-16 |
 |
Silver Paste
After the preparation of silver brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage。The product can be used to complex structure, with higher bra |
2017-08-12 |
 |
Aluminum Brazing Flux
Aluminum brazing flux can effectively remove aluminum alloy surface oxide, aluminum alloy brazing different temperature section. Can be used of aluminium and aluminium alloy brazing， |
2017-08-02 |
|
