| Picture |
Heading |
Updated |
 |
Tin-bearing Silver Brazing Alloy
Tin-bearing silver brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance. It is used for brazing |
2017-12-25 |
 |
Powdered Brazing Flux
Flux has lower melting point than brazing filler metal, good surface activity. It can break or dissolve metallic oxides on the surface of work and brazing alloys during the process, which is good for the liquid brazing alloy wetting the surfaces to permit |
2017-12-18 |
 |
Flux Cored Silver Brazing Alloy
The silver brazing alloy can be made into flux cored brazing alloy. Flux cored silver brazing alloy is applicable to automatic brazing. It has higher production efficiency, saves the material consumption. And it can be used to braze without flux. |
2017-12-07 |
 |
Copper Aluminium Alloy
copper aluminium alloy can be used for brazing copper and other alloys, meet the special requirements of customers. |
2017-12-05 |
 |
Silver Copper Alloy
Silver Copper alloys is a kind of silver-based solid solution. It has goodproperties such as appropriate melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity and electrical conductivity. |
2017-12-04 |
 |
Bronze Brazing Paste
After the preparation of bronze brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage. Product is suitable for brazing copper, bronze and steel, et |
2017-11-16 |
 |
Phoscopper Brazing Alloy
Copper phoscopper brazing alloy are principle elements of the product, it owns good fluidity and is applied in the resistance brazing, flame brazing and high frequency brazing. It is used in brazing of copper and copper alloys, but not in brazing of ferro |
2017-11-01 |
 |
Sn-Cu Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-10-21 |
Friends links